相关标准
固体润滑，WS2涂层生产企业
全部分类
航空标准
- 分类：相关标准
- 发布时间：2020-04-16 00:00:00
- 访问量：0
概要:MOS2/二硫化钼、铁氟龙，Ni-P-PTFE
详情
(R) Lubricant, Solid Film, Heat Cured,
Corrosion Inhibiting
Procurement Specification
MOS2/二硫化钼
1. SCOPE:
This SAE Aerospace Standard (AS) establishes the requirements for heat cured solid film
lubricants. For other general or high temperature applications, see AS1701.
1.1 Application:
For applications where temperatures may range from -90 to 400 °F (-68 to 204 °C).
1.2 Type:
This specification establishes the following types:
Type I: A lubricant capable of being cured within 60 minutes at 302 °F ± 27 °F (150 °C
± 15 °C) with an endurance life of 250 minutes minimum. See 6.4 for related
product information.
Type II: A lubricant capable of being cured within 60 minutes at 400 °F ± 27 °F (204 °C
± 15 °C) with an endurance life of 450 minutes minimum. See 6.4 for related
product information.
Type III: A low volatile organic compound (VOC) content lubricant capable of being
cured within 120 minutes at 302 °F ± 27 °F (150 °C ± 15 °C) or within
60 minutes at 400 °F ± 27 °F (204 °C ± 15 °C) with an endurance life of
450 minutes minimum. Type III shall be used when performance is satisfactory
for the desired application to meet VOC emission regulations.
Color 1 - Natural product color.
Color 2 - Black color. See 3.7.
See 6.4 for related product information.
关键词： MOS2/二硫化钼、铁氟龙，Ni-P-PTFE
扫二维码用手机看
页面版权归 比尔安达(上海) 润滑材料有限公司所有 《中华人民共和国信息产业部》 沪ICP备06054649号
Tel:021-61486659 61486660 Fax:021-61486662 E-mail:[email protected] Adress:上海市宝山区长建路198号1号厂房